The design and development of the fuse holder is to better install and replace a single fuse. When installing the fuse, we need to apply some necessary equipment. After the equipment is completed, we can ensure that the fuse is installed more smoothly. When installing the equipment, we need to use a fuse holder, because without this equipment, it is impossible to install a fuse on the product.

When researching a fuse, I often check the fuse holder by the way. Because different fusions are installed on different circuit boards, if the circuit boards are different, then the fuse holder we choose is also different, and the installation position is also different, and the choice of the fuse holder should also be different.

Fuse holders can be divided into panel mount fuse holders, PCB (hard) board fuse holders, automatic plug-in fuse holders, and plug-in fuse holders. The fuse holder must contain the requirements for current, voltage, high temperature and fire rating. These factors are mainly determined by the quality of the plastic parts and metal parts of the fuse holder. The better the quality, the higher the temperature resistance coefficient.

The assembly of the fuse holder is mainly composed of nuts, plastics, copper, etc. When electroplating the fuse holder terminal, there are certain requirements on the surface of the electroplating production area: anti-corrosion, anti-seepage and anti-effect. The production line contains a water tank to collect spray liquid and cleaning liquid devices. The primary requirement of an electroplating production line with good electroplating quality is high-quality automatic continuous electroplating production line equipment, which requires good electroplating production process habits.

The quality of the fuse holder terminal electroplating directly affects the follow-up of the PCB welding work. The electroplating quality also has a direct impact on the welding quality. We often encounter poor welding production processes, electroplating oxidation, etc. In terms of problems, the metal electroplating surface is very special. Instability, this also emphasizes the importance of the electroplating process of the fuse holder terminal.